-40%
4WD TRANSFER SWITCHES TRANSFER CASE4WD LIGHT SWITCH HI & LO (Qty 2) Chevy Suzuki
$ 46.99
- Description
- Size Guide
Description
TRANSFER CASE 4WD SWITCHES. ALSO Called 4wd Transfer Switches, 4WD LIGHT SWITCHES, Four Wheel Drive Transfer Switch, 4wd Engage Switch.BRAND NEW OEM SUZUKI -
TWO SWITCHES
- EACH SWITCH HAS IT OWN PART NUMBER, ONE HI SWITCH and ONE LO SWITCH
1 HI RANGE SWITCH 4WD
1 LO RANGE SWITCH 4WD
# 14 and # 16 in Basic Image
SELLING AS A PAIR BECAUSE IF ONE IS BAD IT CAN IMPAIR THE OTHER.
(SEE PIC FOR LOCATION and BASIC REPLACEMENT INSTRUCTIONS BELOW)
SEE COMPATIBILITY CHART
IN ADDITION TO FITMENT CHART, ALSO FITS
SUZUKI ESCUDO 1.6, 2.0 4WD 2001 - 2004
Grand Vitara XL-7 JA420WD-4
If you have an 89 - 91 with only Hi Range, contact us with your VIN #. If you have both HI & LO Range this is correct fit.
BASIC REPLACEMENT INSTRUCTIONS -
This if referencing a 2000 Tracker, Yours may vary - Reference the picture included within the ad to locate the switches
You will be removing the console and gear select shift lever (AT) and looking down onto the top of the Transfer Case for access.
Slide seats forward, remove two side Philips screws from E-Brake console and remove e-brake console and set on driver seat or disconnect wires to fully remove.
Slide seats back, remove two plastic pins at side rear of shift console by prying out with flat screwdriver and remove two front side Philips screws. Remove shift console and unplug wiring to the N/P switch.
12 MM unbolt the shift lock release and using needle nose slide off of the bushing.
Unbolt the 4
12MM from the shift console. Remove it to expose the shift cable.
Pull the pin and slide off the shifter (Yours may vary).
You will now have access to the switches.
Do One at a time as they are different and take a different size wrench. Unplug the connector,
unscrew the switch and replace
RETURNS -
SELLER DOES NOT ACCEPT RETURNS
WARRANTY / DEFECT
– THESE ARE INSPECTED BY US FOR VISIBLE ISSUES, 30 DAY REPLACEMENT IF CONFIRMED MANUFACTURER DEFECT.