Magnetic Water Main Valve Box Lid Lifting Tool, 24" Long w/ T-handle, #MVB-24

Description

Magnetic Valve Box Lid Lifter
This tool is used to easily lift cast iron or steel water main valve box lids out of the valve box housing. No more kneeling and prying with two screwdrivers. Place the magnetic base on the center and lift straight out with the T-handle. The sharp end of the handled can be used to pry or chisel stuck lids to get the loose to lift. Strongly stuck lids may need to be loosened first with a heavy hammer before lifting out.
Magnet lift rating of 249 lbs.*
Pry stuck lids with one end of the handle
Pry or hammer with the flat end to knock stuck lids loose
Solid Steel Shaft with Railroad Tie T-handle for prying or chiseling
Approximately 24” Long to Reduce bending over and potential back injury
Simply tilt to a 45 degree angle to separate tool from lid.
Model MVB-24
Valve box lid shown in photo is for illustration only and is not included.
Ships only to USA and Canada
MADE in
USA
* Magnet lift ratings are based on lifting straight up on flat steel. lift on raised letter and corroded or painted lids will be slightly less depending on the lid configuration.